Thule Hull-a-Port XTR canoe / kayak carrier no. 848
£219.95
Code: TU848
In stock
A tiltable, space-saving and easy-to-load kayak carrier, that folds down to the level of the load carrier, so there is no need to take it off to get into the garage. Transforms from a J-cradle for one boat to a two-boat kayak stacker.
Includes 2 x 400cm straps with a rubber buckle for added protection as well as bow and stern tie-down straps.
Fits around bars up to 80.5mm wide (fits all the bars we sell except Yakima/Whispbars and Thule SlideBars/ProBars).
The Description tab lists the bars we sell which are unsuitable for this product.
A tiltable, space-saving and easy-to-load kayak carrier, that folds down to the level of the load carrier, so there is no need to take it off to get into the garage. Transforms from a J-cradle for one boat to a two-boat kayak stacker.
Includes 2 x 400cm straps with a rubber buckle for added protection as well as bow and stern tie-down straps.
Fits around bars up to 80.5mm wide (fits all the bars we sell except Yakima/Whispbars and Thule SlideBars/ProBars).
The Description tab lists the bars we sell which are unsuitable for this product.
Please note that this carrier is clamped around the roof bars and therefore will not fit to Dropracks systems, Thule ProBars and Thule Slidebars (they are too deep, and they also slide). The clamps are also too narrow for fitting to any Yakima bars. A versatile kayak rack that takes one or two kayaks and folds flat when not in use. It simplifies the loading process but also leaves room on the roof for other gear. Includes integrated 'StrapCatch' for easy strap management when securing the kayak.
|
A specific watersports carrier will make carrying your gear much easier. The aim of this note is to persuade you that kayaks (or boats etc) should always, also, be tied to the carrying vehicle at both bow and stern. Untied kayaks have, in our experience, the greatest potential for a roof bar or kayak carrier failure. The massive forces that untied kayaks can generate have even been known to snap roof bar fixing bolts with the result that a complete assembly of roof bars and kayaks has ended up on the road. We know that this has happened with almost every brand of roof bar, and regardless of whether the kayaks are on a special carrier or just strapped to the bars. You need to fix bow and stern lines, probably using the front and rear screw-in towing eyes to get strong and accessible fixing points on the vehicle. You can use, for example, 'paracord' for this purpose. Alternatively, we have sets of straps available that are perfect for the job and are really easy to use. Yakima make some excellent Bow/Stern tie down straps and Thule makes the QuickDraw 838 which we have listed together with every kayak carrier we sell. Please note that kayaks should be strapped to the roof bars, or to kayak carriers, using straps that are suitable for the purpose, e.g. 25mm polypropylene straps with strong buckles. Most kayak and other watersports carriers come supplied with such straps. We also have a range of suitable straps available, click here for details. Bungee cords must never be used. Please also note that all roof bar instructions point out the dangers of carrying unsecured long items, as of course do all kayak carrier instructions. If you tie down your kayaks you almost certainly won't experience a product failure. If you don't you may or may not get away with it. If there is a disaster and the kayaks end up on the road, separated from the vehicle, then you were not using tie downs and you have subjected the roof bars to forces for which they were not designed. The costs of sorting this out are yours, not ours, and you may also have difficulties with your insurers. We're sorry to be so firm about this, but "things coming off the tops of cars" is the stuff of nightmares, and we want to do all we can to prevent accidents of this sort from happening. |
Delivery charges and arrangements:We charge a contribution towards delivery costs, depending on what you order, where you live, and how quickly you want the goods. These are our standard charges; there are usually surcharges for all offshore destinations and some remote postcodes - for details please see our delivery information page.
Delivery of other items
Delivery timesDelivery times are calculated in working days (Monday to Friday, excluding Bank holidays). Cut-off times for Express Delivery orders
Delivery FAQsWhen will my order arrive? What about Next Working Day delivery? Is my delivery day guaranteed? Do I need to be at home? Payment options:We take the following cards, and also PayPal. Please note that the entry on your card statement will be from "The Roof Box Company". Secure paymentsOur website is secured by Sectigo (formerly Comodo CA), the largest commercial Certificate Authority in the world. |
Technical specifications at a glance: Can be used with: kayaks (2x) Includes a mast holder: no Includes straps: 2 x 400cm Weight: 5.6kg Maximum load: one kayak: 34kg, two kayaks: 59kg Maximum boat width: 91cm Width: 23cm (unloaded) Required space on roof bars: 43cm in upright position (52cm including the handle) Fits square bars: yes Fits aerobars: most - up to 80.5mm wide by 23-32mm deep* Minimum distance between roof bars: 61cm Lockable: yes, locks available separately Warranty: 2 years (plus an extra 3 years if you register the product with Thule) Additional fitting information: * comes with fittings that fit around most bars up to 80.5mm wide and vary between 23 and 32mm deep. Fits around standard (32 x 22mm) bars as well as Thule, Atera and Cruz aluminium bars. They don't fit all types of aero bar including Whispbars, Yakima bars and Thule SlideBars or ProBars. |
To find the spare parts you need, please see the diagram below, identify the product codes, then choose them from the list below. If you need more than 1 of any item, change the quantities in the Shopping Basket. |